Code Alarm CR3 Manuel d'utilisateur télécharger pdf (Page 15)

V002450_25_CR1200-CR2-CR3-CR2500-CR3500_Interface_Configuration_Document_CLIENT.docx

2011-04-27 Page 15 of 65

•

14870 S. Pony Express Rd., Suite 200, Bluffdale, UT 84065

•

(801) 495-2200

•

FAX (801) 495-0280

Causes the Reader to flash its LEDs; data contains four bytes:

LEDs repetitions onTime offTime

LEDs specifies the state of the LEDs: 1 to turn on, 0 to turn off:

Bit

LED

Applicable Hardware

reserved, always 0

CR2, CR3

left blue

CR2

left green

CR2

left red

CR2

center green

CR3, CR1200

center red

CR3, CR1200

right green

CR2

right red

CR2

Both onTime and offTime are specified in 1/100

seconds (max 2.55 seconds).

(The Reader will respond with d or e.)

Example – flash left LED amber 3 times, ½ second on, 1 second off:

.%30%03%32%64

Toggle a bit (or bits) in a Reader setting; data contains a printable ASCII string in the

following format: hexadecimal setting number in parentheses followed by a 32-bit signed

integer value, expressed in ASCII hexadecimal characters (with optional minus sign) or

ASCII decimal characters preceded by the ‘#’ character, e.g., /(2e)1000 or /(2e)#4096;

the specified integer is XORed with the existing setting value.

(The Reader will respond with d or e.)

Note: see Section 8 for possible Reader settings.

Indicates the start of a file download; data is empty. This command is followed by a

sequence of 2 commands containing the file data and a download-end command (e.g., 5).

(The Reader will respond with d or e.)

Indicates a continuation of a file download; data contains the next portion of the file data.

(The Reader will not send any response.)

Indicates the end of a regular file download; data contains the name of the file, which is

from 1 to 200 letters, digits, periods, hyphens, and underscores, terminated with ASCII

NUL.

(The Reader will respond with d, e, or f.)

Note: This command is supported in firmware version 3100+

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 64 65

Commentaires sur ces manuels

Pas de commentaire

Code Alarm CR3 Manuel d'utilisateur Page 15

Commentaires sur ces manuels