Code Alarm 3000 Manuel d'instructions télécharger pdf (Page 8)

Keypad Zones

There are three zones which can be activated from the keypad. They are activated

by pressing two keys at the same time and holding them for 2 seconds. These zones

may or may not be active on your keypads depending on how your installer has

programmed them.

[F] Keypad FIRE zone. Pressing this key for 2 seconds will activate the

keypad fire zone and the bell/siren output will pulse ON and OFF. This

zone is annunciated by the “Fire” light on the keypad.

[A] Keypad AUXILIARY zone. Pressing this key for 2 seconds will produce

a series of beeps on the keypad along with the transmission. To

confirm transmission, the keypad sounder will beep 6 times.

[P] Keypad PANIC zone. Depending on how your installer programs the

panel, pressing this key for 2 seconds may produce a completely

silent alarm or an audible alarm along with the transmission. If

programmed as audible, the alarm bell will ring.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Code Alarm 3000 Manuel d'instructions Page 8