Code Alarm F65 Spécifications télécharger pdf (Page 16)

www.pulsar.pl PowerSecurity

Electrical parameters at the AUX outputs of the PSU:

- output voltage at the AUX1 output [V]

- output voltage at the AUX2 output [V]

- total output current

- the fuse status at the AUX1 output

- the fuse status at the AUX2 output

In case of fuse activation, the symbol changes to red and flashes.

Information window with the PSU type

Current battery status:

- battery voltage [V]

- charging level

- TEST: performing battery test (see section 5.4)

- battery fuse status

- battery temperature

- resistance of the battery circuit

In case of fuse activation, the symbol changes to red and flashes.

EXTo - controlled relay output EXTo status.

its backlight changes into red and the contacts change their position

(C closed with NO)

On – the start button of the controlled relay output EXTo.

EXTi – input of the collective failure EXTi status.

In case of the input activation, its backlight changes into red.

TAMPER – TAMPER input status.

In case of the input activation, its backlight changes into red and the

contacts change their position (opening).

Status of the technical outputs of the PSU.

EPS - AC power ON indication

open, red backlight = AC power failure

closed, green backlight = AC power ON:OK.

PSU – PSU failure indication

open, red backlight = failure

closed, green backlight = PSU status OK.

APS – battery failure indication

open, red backlight = battery failure

closed, green backlight = battery OK.

ALARM – collective failure indication

Fault example, the output is open and highlighted in red.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Code Alarm F65 Spécifications Page 16