Code Alarm PC 7500 Manuel de l'opérateur télécharger pdf (Page 11)

Numeric LEDs

Green numeric LEDs display %SpO

and pulse rate values. When

setting the device, these LEDs also display values for alarm limits,

volume, and date and time settings.

Indicators and Icons

Alarm Bar LED

This LED indicates all alarm conditions. For high priority

(patient) alarms, the indicator is displayed in red, blinking fast.

For medium priority alarms, the indicator is displayed in amber,

blinking slowly.

Pulse Quality LED

This amber LED blinks to indicate a poor pulse signal. If there is

a sustained period of poor quality signals, this LED will display a

steady, constant light.

Sensor Alarm LED

This amber LED indicates when a sensor has become

disconnected, has failed, or is not compatible with this monitor.

WARNING: Do not use a damaged sensor.

Pulse Strength Bargraph LED

This 8-segment tricolor bargraph indicates pulse strength as

determined by the oximeter. The height of the Pulse Strength

Bargraph LED is proportional to the pulse signal, and the color

is determined by pulse strength:

Green = a good pulse strength

Amber = a marginal pulse strength

Red = a low pulse strength, high priority alarm

Alarm Silence LED

This amber LED indicates that the audible alarm is silenced for

two minutes when it blinks. When alarms are active, this LED

blinks in time with the alarm bar. If no alarms are active, this

LED flashes at the medium priority alarm rate. When lit solid,

the Alarm Silence LED indicates that audible alarm volumes are

set to less than 45 dB.

AC Power Adapter LED

This green LED is displayed when an external power supply is

providing power to the Model 7500.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Pas de commentaire

Code Alarm PC 7500 Manuel de l'opérateur Page 11