Code Alarm PC 7500 Manuel de l'opérateur télécharger pdf (Page 34)

Troubleshooting

Problem Possible Cause Possible Solution

Model 7500 will

not activate.

The unit has no power. Plug in the AC adapter.

Model 7500 will

not operate on

batteries.

The battery pack is not

charged.

Plug in the Model 7500 AC Adapter

to charge the battery pack.

The battery pack is

inoperable.

Contact NONIN Customer Support

for repair or replacement.

Unable to obtain a

green pulse

display on the

bargraph.

The patient pulse

strength is

indiscernable or

perfused poorly.

Reposition the finger or insert a

different finger, and keep the

sensor motionless for at least 10

seconds.

Warm the patient’s finger by

rubbing or covering with a blanket.

Position the sensor at a different

site.

NOTE: In some

instances, patient

perfusion may be

inadequate for

pulse detection.

Circulation is reduced

because of excess

pressure on the

sensor (between the

sensor and a hard

surface) after inserting

finger.

Allow the hand to rest comfortably

without squeezing or pressing the

sensor on a hard surface.

The finger is cold. Warm the patient’s finger by

rubbing or covering with a blanket.

Position the sensor at a different

site.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 44 45

Commentaires sur ces manuels

Pas de commentaire

Code Alarm PC 7500 Manuel de l'opérateur Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Les démarreurs à distance Code Alarm PC 7500